后现代主义思潮对我国大学生的影响及对策

在全球化、网络化的时代境遇里和我国对外开放的现实背景中,以反基础主义、反本质主义、反理性主义、反中心主义为基本理论取向的西方后现代主义思潮,对思想上独立性、开放性和包容性很强的当代我国大学生发生了一系列的影响。它一方面有利于培养大学生的创新精神、有利于激发大学生的主体意识和有利于升华大学生的思维方式,另一方面也容易使大学生在价值观念上陷入虚无主义、在思维方式上滑向相对主义和在行为方式上掉进无政府主义。要有效应对西方后现代主义思潮的影响,应该加强对其的研究,以社会主义核心价值体系武装大学生,同时推进高校德育改革和加强校园文化建设。     

利用曲线拟合方法分析暂态振荡信号

提出了一种利用曲线拟含定量分析暂态振荡信号的方法.该方法给出的暂态振荡信号模型能够反映振荡的幅度和频率随时间变化的规律.提出了利用曲线拟合方法确定该摸型的具体参数的步骤:首先利用三次样条插值求出信号的上包络曲线,对其采用指数衰减信号模型来进行拟合以描述信号振荡幅度的变化参数;然后得到信号频率变化部分的正弦形式,利用 Hilbert 变换提取出正弦部分的相位,并采用幂指数信号模型进行拟合以描述信号振荡频率的变化参数.与以往分析暂态振荡信号的方法相比,该方法可对信号进行定量分析.仿真和试验结果表明,采用曲线拟合方法确定模型参数,实现过程简单,均方根误差小;对实际信号的分析则表明所提出的模型能够真实地反映出实际暂态振荡信号的变化规律.     

基于最小隶属度偏差的作战通道模糊优选

作战通道的优选对于充分发挥武器装备的效能,提高水面舰艇的作战能力具有十分重要的意义.通过分析作战通道效能评估的指标因素,确定指标相对优属度,应用最小隶属度偏差法,建立了作战通道的模糊优选模型,求解后得出了在该原则下的通道评估结论,为作战通道的优选提供了一种比较科学的定量分析方法.最后通过实例仿真计算得出了多条作战通道的优劣排序,为海战指挥员的科学决策提供参考.     

一类非线性二阶多点边值问题多个正解的存在性研究

通过定义适当的锥,运用锥映射的不动点定理,结合上下解方法,给出了二阶多点边值问题多个正解存在性的判定方法.作为特例,获得了三点边值问题多个正解存在性的判定依据,从而推广了相关文献中关于二阶三点边值问题正解存在性的结果.     

Effect of tool rotational speed on the particle distribution in friction stir welding of AA6092/17.5 SiCp-T6 composite plates and its consequences on the mechanical property of the joint

This study investigates the effect of tool rotational speed (TRS) on particle distribution in nugget zone (NZ) through quantitative approach and its consequences on the mechanical property of friction stir welded joints of AA6092/17.5 SiC_p-T6 composite. 6 mm thick plates are welded at a constant tool tilt angle of 2° and tool traverse speed of 1 mm/s by varying the TRS at 1000 rpm, 1500 rpm and 2000 rpm with a taper pin profiled tool. Microstructure analysis shows large quantity of uniformly shaped smaller size SiC particle with lower average particle area which are homogeneously distributed in the NZ. The fragmentation of bigger size particles has been observed because of abrading action of the hard tool and resulting shearing effect and severe stress generation due to the rotation of tool. The particles occupy maximum area in the matrix compared to that of the base material (BM) due to the redistribution of broken particles as an effect of TRS. The migration of particles towards the TMAZ-NZ transition zone has been also encountered at higher TRS (2000 rpm). The microhardness analysis depicts variation in average hardness from top to bottom of the NZ, minimum for 1500 rpm and maximum for 2000 rpm. The impact strength at 1000 rpm and 1500 rpm remains close to that of BM (21.6 J) while 2000 rpm shows the accountable reduction. The maximum joint efficiency has been achieved at 1500 rpm (84%) and minimum at 1000 rpm (68%) under tensile loading. Fractographic analysis shows mixed mode of failure for BM, 1000 rpm and 1500 rpm, whereas 2000 rpm shows the brittle mode of failure.     

基于正态分布曲线的分段式变步长LMS算法

针对传统最小均方误差(Least Mean Square, LMS)自适应滤波算法由于步长固定,在解决稳态误差与收敛性之间的关系时,始终处于矛盾状态的问题,在对传统的固定步长LMS自适应滤波算法分析的基础上,根据变步长LMS自适应滤波算法的步长调整原则,通过构造步长因子与误差信号的非线性函数,提出了一种基于正态分布曲线的分段式变步长LMS自适应滤波算法,并分析了参数取值对算法性能的影响。针对实际信号处理过程中参考信号难以选取的问题,提出了一种基于分裂阵的参考信号选取方法。理论和海试数据分析结果表明:该算法的收敛速度和稳态误差明显优于固定步长的LMS自适应滤波算法和基于Sigmoid函数的变步长LMS自适应滤波算法。     

型号研制与产品数据管理

介绍了产品数据管理(PDM)的概念和基本功能,结合当前型号研制的特点和计算机信息技术应用的状况、发展,研究了型号研制产品数据管理的需求、功能及实施,为当前型号研制依靠CIMS技术实现产品数据管理提出了8条基本原则。     

Does Military Spending Nonlinearly Affect Economic Growth in South Africa?

Using annual data collected from 1988 to 2015, this study provides evidence of a non-linear relationship between military spending, economic growth and other growth determinants for the South African economy. The empirical study is based on estimates of a logistic smooth transition regression (LSTR) model and our empirical results point to an inverted U-shaped relationship between military spending and economic growth for the data. Furthermore, our empirical results suggest that the current levels of military spending, as a component of total government expenditure, are too high in the South African economy and need to be transferred towards more productive non-military expenditure in order to improve the performance of economic growth and other growth determinants.     

无源RFID系统中推断式二进制搜索算法

在现有的RFID标准中，一般标签ID都由几个不同含义区间组成。针对这种特点，提出推断式二进制防碰撞算法：在识别每个区间段的ID时，利用某个特定读写器中的前缀库推断该区间段各个位的取值，以便减少待识别标签ID的位数。同时，通过调整参数u，可以对系统可靠性进行控制。仿真实验表明，在没有新前缀出现的情况下，推断式二进制防碰撞算法能够将QT算法的识别速度提高3倍、标签平均响应次数降低3／4。